BNC Male to BNC Male Coaxial Cable — Full Copper HF400 Flexible Extension Coax 50 Ohm (LMR400 UF UltraFlex equivalent)
P/N: HF400-BNCM-BNCM
EAN: 4752284004712
A high-quality HF400 UF (LMR400 UF) cable is widely used in cellular amplification systems as well as for switching various RF devices operating at frequencies up to 11 GHz. This cable version has a center conductor made of stranded pure copper.
The main difference between the HF400UF cable and the cheap RG-58 series is the significant reduction in loss of the RF signal. When using cheap RG-58 cables, the unwanted attenuation is already noticeable at 10-15 meters of cable length. With the HF400 UF cable, the cable length can be up to 50 meters while the end device (repeater, router, or cellular modem) still receives sufficient signal strength.
For example, the power loss with an HF400 UF cable with a length of 100 meters ranges from 13 dB for the 900 MHz band to 24 dB if you use a signal at 2600 MHz, but with RG-58 cable, the losses are usually 2.5 – 3 times higher.
Our cable supports a variety of RF connectors (N, SMA, TNC and others). The impedance of 50 ohms guarantees compatibility with radio equipment.
The cable’s conductor is made of Stranded Pure Copper (CU). A foamed polyethylene dielectric ensures the cable’s good flexibility. The HF400 UF cable complies CPR Eca according to Construction Products Regulation of 2011 (CPR). You can use the cable both inside buildings and outdoors.
Cable Type: HF400 Flexible (LMR-400-UF equivalent) with PVC jacket
Center Conductor Type: Pure Copper (7 x 0,95 strands)
Impedance: 50 Ohm
Frequency Range: DC – 11GHz
Cutoff Frequency: 31 Ghz
V.S.W.R: ≤ 2
Shielding Effectiveness: >90dB
Capacitance: 80 pF/m
Dielectric Type: PE
Jacket Material: PVC
No. of Shields: 2 (Aluminium foil + Tinned Copper Braid)
Operating Temperature: -30 to +70 deg C
Diameter: 10.30mm
Inner Conductor: 2.75mm
Dielectric: 7.25mm
Bending Radius: 100mm
Categories: Coaxial Cables -> LMR400
